Featured

Compact & Expandable Miter Saw Station

Portable MFT Workbench

This small workbench is going to be awesome for cutting large sheets of plywood!

Rolling File Cabinet

Build this super easy and functional rolling file cabinet!

Dust Collection Upgrade!

I finally install a REAL dust collection system in my shop!

Bed with ROUND Castle Joints

Castle joints are a common way to assemble a bed frame, so I added a little twist by making the base of the joint round, instead of the typical square…

Modern Slat Bed

Building a bed is an intimidating project because it’s so large, but once broken down, it’s actually quite simple!

Portable Workbench

Have a small workshop or no workshop at all? This bench is the perfect solution!

5 Easy Handmade Holiday Gift Ideas

Looking for some easy handmade Holiday gifts to make this season? Here are 5 projects you can make only using wood!

Side Table with Angled Box Joints

Inspired by the Three-Way Bridle Joint experiment, I made this table using that joint and added ANGLED box joints!

Three Way Bridle Joint

Bridle joints are super strong, so I wanted to experiment with joining three pieces of wood using this joint. Turns out it’s pretty easy!

Router Table Cabinet

I finally got around to building a cabinet for my router table to help with dust collection and add extra storage!

Acute Angle Miter Saw Jig

Ever need to cut a steep angle that your miter saw can’t cut? Not a problem anymore with this simple jig!

Multi Guitar Rack

My guitars needed a home, so I built a modern guitar rack out of dowels.

Curved Plywood Chair

The Builders Challenge season 11 was a little different this time around, no plans, just a theme… sit on it! So I built a chair, a curved plywood chair…

Mini Mortising Jig for Loose Tenon Joinery

Loose tenons are an extremely strong joint, but some of the machinery required to make them can get a little pricey… Not anymore! This Mini Mortising Jig can be made using scraps plus the cost of a few little clamps and fixtures, and you’ll be making quick and easy loose tenons in no time!

No Weld STEEL & Oak Bookshelf Storage Bench

I love the look of steel, but I don’t know how to weld! So I figured out a way to make a NO-WELD steel and white oak bookshelf/toy storage bench!

6-IN-ONE Trim Router Jig

Make a jig that can turn your trim router into the ultimate tool!

Collapsible Bandsaw Bowls

Making a collapsable wooden bowl is easier than you think and it’s really fun too!

5 Easy Scrap Wood Gifts

Looking to make some quick and simple Holiday Gifts? Here are 5 easy projects you can make from scrap wood!

Adjustable Dado Jig

Learn how to make an Adjustable Dado Jig that can also be used as a mortising jig.

Geometric Veneer Record Player Stand

Building a Geometric Walnut Veneer Record Player Stand.

Sunburst Veneer Guitar

This is my take on the traditional sunburst design on a guitar. Usually, it is painted on, but I wanted to see if I could make a sunburst design with veneer. Super fun!

Hand Tool Sharpening

There’s nothing better than working with a sharp hand tool… here’s my process for getting that razor-sharp edge.

Three String Explorer Guitar with Patchwork Veneer

Cigar box guitars are so fun and easy to make, even more fun when you get creative with the shape!

5 Easy Woodworking Projects for Kids

Here are some quick and simple woodworking projects you can build with your little ones!

Interlocking Puzzle Joint

How does this joint work? It’s actually pretty simple!

Pool Toy Storage

This pool toy storage bin organizes all your pool toys, it can be built in only a few hours with minimal tools!

Modern Storage Bench

Who doesn’t love extra storage? And what about brass? A killer combo that makes this bench super cool and functional.

6-in-1 Universal Trim Router Jig

$79.99

This is the ultimate multi-functional jig for your trim router.

Use it for:

Greater control when freehand routing
Flush trimming inlays or exposed joinery on top of your workpiece
Flush trimming edge-banding, dovetails, or box joints
Dados, Grooves, and Mortises (up to 14.5 inches from edge with extension base)
Cutting circles big or small, WITH or WITHOUT drilling a hole in your workpiece (up to 36.5 inches in diameter with extension base)
Includes an extendable base for even more versatility

BONUS FEATURES:

Accepts guide bushings (not included) so you can use it for template and inlay work
Make an on-the-fly router table by securing your trim router upside down with the main base attached

Made from ¼ inch thick acrylic, this jig is durable and transparent — so you can see exactly what you’re doing.

It’ll maximize the precision and uses of your trim router, from detail work to heavier cutting.

Watch this video to see how it’s used.

We’re manufacturing this jig OURSELVES here in the USA so we can give it to you for the best possible price (which is less than it would cost you to buy the materials and build it yourself).

WHAT’S INCLUDED

The 6-in-1 Universal Trim Router Jig comes with all needed components. And with the included instructions, assembly and use are super easy.

Main Base Plate
Triangle Base with threaded hole
2 Extension Feet with Smooth Center Holes
Extension Foot with Threaded Hole
2 Extension Arms
2 Handles
1 Threaded Circle Cutting Pin
6 Knobs
8 T-Bolts

*NOTE: The threaded circle cutting pin is really small. It will be taped to the handle when your jig arrives, so keep an eye out.

COMPATIBLE TRIM ROUTER BASES - INCLUDES CORDED AND CORDLESS MODELS

MAKITA
MAKITA PLUNGE BASE
BOSCH COLT*
BOSCH PLUNGE
DEWALT
DEWALT PLUNGE
MILWAUKEE
RIDGID
RYOBI

* Does not fit the Bosch GKF18V-25N or GLF18V-8, which have a narrow 4 Hole Pattern.

Slide Stop

$24.99

Introducing the Slide Stop—the first easily movable stop for fenceless miter saw stations THAT DOES NOT DEFLECT. Seriously, this thing is solid as a rock.

Designed by Tamar at 3x3 Custom and Jonathan of KM Tools, the base of the Slide Stop fits into most T-track sizes. Tighten both knobs to lock it into position, and get accurate, repeatable cuts every time.

The real game changer? Keep the base locked in position, but slide the stop out of the way to make longer cuts—without losing your perfect setup. Then slide the stop forward again when you’re ready for more repeatable cuts.

In addition to using the Slide Stop at your miter saw station, it can be added to your router table fence for repeatable stop cuts. To see all the ways you can use the Slide Stop, check out Tamar’s video on building your own miter saw station.

The stop is made of solid aluminum and includes 2 bolts and 2 knobs. Its unique design allows it to fit many different sizes of T-track that have a top opening of 8.3mm or wider. Simply push the squaring ledge against one edge of the T-track, and tighten it down. You’ll have a perfectly square set up every time.

Jonathan’s Hot Take

Tamar has done it again, I’m so happy we get to help her design and produce the Slide Stop. This thing is rock solid, and so convenient. I love how easy it is to slide the stop out of the way when you need to make a different length cut.

Pro tip—grab a couple of these, and they’d be perfect for a project that requires multiple parts in a few different sizes. Just set up multiple stops at specific points, and slide the ones you don’t need out of the way.

This is sure to go fast, so be sure to grab one before we sell out!

Limited Edition 3x3 Custom Stop Block

$38.99 $42.99

This is exactly the same as the Katz-Moses Universal No Deflection Stop Block, but laser etched with the 3x3 Custom logo.

We put these together to celebrate the launch of my 6-in-1 Universal Trim Router Jig — and they turned out so cool!

There are only a limited quantity of these available, so get them while they’re hot!

ZERO DEFLECTION so it won’t budge even if you bang stock up against it (no other stop block on the market can say the same)

Can be 2.25-3.75” tall with positive stops every 1/2”

Has a 1” micro-adjust feature. Don’t worry about having to reset your stop block. Use the micro adjust feature to sneak up on a cut.

Can extend from the fence 1.5 inches or be snug up against it at 1/4” depending on the size of your stock

Can be used in the vertical or horizontal position depending on whether your t-track in on the top or face of your fence

When not in use, it stores out of the way behind your fence. Other stop blocks flip up, which can get in the way or come crashing down and dent your stock.

Version 2.0.1 has a matte anti-slip coating and bigger brass buttons

3x3 Custom Dog Hole Router Template (Imperial)

$34.99

Want to add greater functionality to your workbench? This Dog Hole Router Template makes it easy.

Dog holes turn a simple workbench into a workholding machine. They let you use bench dogs, hold-downs, holdfasts, planing stops, and a whole lot more — all without clamps.

Simply chuck a 1/4” straight bit and ⅜” diameter bushing in your plunge router, and let the template holes do the rest.

The result is standard size ¾” dog holes spaced 3” apart.

Tamar’s Hot Take:

Why I love it:

Clear acrylic allows you to see through it, ensuring precise hole placement. With lines etched on the underside, you can easily align your jig wherever you need it, making it highly customizable.
No need to remember what size bushing or bit to use because it’s already etched on the jig!
You can drill up to 9 holes at once, which is more than most other jigs on the market, saving you a significant amount of time.
Use your already drilled holes as a reference to align the next series of holes, ensuring a perfect layout.
When you use the included bolts as an edge reference, the holes will be placed 3 inches away from the edge. This distance is ideal for dog holes that are in line with a tail vise, providing enough room to place a hand plane on its edge which turns your workbench into a functional shooting board!

Need some bushings? Check out these Router Bushing Sets we carry, as well as our collection of Router Bits.

WHAT’S INCLUDED:

Dog Hole Router Template
3 x Alignment Bolts
2 x 3/4" Dogs

3x3 Custom Dog Hole Router Template (Metric)

The result is standard size 20mm dog holes spaced 96mm apart.

Dog Hole Router Template
3 x Alignment Bolts
2 x 20mm Dogs

3x3 Custom Tracksaw Rail Hinge

$89.99

Looking to improve the accuracy and efficiency of working with a tracksaw? This Tracksaw Rail Hinge is here to help! Designed for seamless adjustments, this durable hinge ensures your tracksaw will always stay aligned for precise cuts every time.

Key Features:

Smooth Operation: Engineered for effortless pivoting, so you can make quick adjustments during your projects.
Simple Installation: The hinge comes fully assembled, simply add the t-bolts and knobs to the side of your bench and you can get back to working on your project.
Increased Accuracy: With the pin on the front rail support, your track will always come back to a square position between cuts. This makes repetitive cuts super efficient!
Compatibility: This version is compatible with Festool, Makita, Milwaukee, Triton, Powertec type rails (rails that have a track on the bottom left side).

Upgrade your workshop with the Tracksaw Rail Hinge, and take your projects to the next level!

See it in action here - PORTABLE MFT WORKBENCH VIDEO

3x3 Custom Flip Stop

$19.99

Stop blocks are necessary to make repetitive cuts, but sometimes they get in the way… I designed this stop block to flip up, making it easy to bypass if necessary, then easily flip back down to your required dimension!

Flip-Up Design: Effortlessly lift the stop when not in use to free up your workspace or make longer cuts without losing your set up.
Accuracy: Designed to lock in place when in the down position, it will not move when you bump your workpiece against it.
Easy Installation: The stop comes assembled with all the hardware you need to use it on 2040 aluminum extrusion or standard T-Track (The kit includes nuts for both profiles, you do not need to use both.) It is specifically designed to be used on low profile fences like 2040, but can be used on any fence you need. (It is 33mm or 1-1/2” tall to fit lower profile fences)

Enhance your setup with the Flip Stop to streamline your workflow and improve efficiency on your projects!

3x3 Custom Tracksaw Rail Hinge 3D Print File

$25.00

Due to popular demand, here is the 3D Print file for my Tracksaw Rail Hinge!

The printer settings I used are displayed in the picture carousel, due to the nature of 3D printing this may be different for you and your machine.

The file includes a “TEST HINGE” so you can test the settings of your own printer before printing the whole thing.

You will need to “break” the hinge loose in order for it to move.

I printed using a 0.4 nozzle, 0.2mm layer, 2 walls, and 25% infill, but feel free to experiment!

The jig requires 2 “Brackets” and 2 “T-Bolt Holders”.

In my experience, the “Brackets” and “Support Pin” printed best standing up (as shown in the picture carousel).

Hardware Required:

Six 1-1/2” T-Bolts

Six Knobs

This version is compatible with Festool, Makita, Milwaukee, Triton, Powertec type rails (rails that have a track on the bottom left side).

Given the nature of 3D printing, some testing and experimentation may be necessary on your part. While I strive to provide helpful information, I may not be able to address all specific questions related to 3D printing. I appreciate your understanding.

These files are intended for personal/non-profit purposes.

If you would like to purchase a completed jig with hardware included check it out here:

3×3 Custom Tracksaw Rail Hinge with Hardware

Reselling these files, even if changed, is strictly prohibited. Please avoid sharing them with individuals who haven’t bought them, even modified versions. I appreciate your understanding and respect for my intellectual property!

NOTE: After purchasing, a link to download the file will appear on the CONFIRMATION PAGE and you will receive a SEPARATE e-mail.

This link will EXPIRE 24 HOURS AFTER PURCHASING, so save the plans as soon as you can!

Brass Router Guide Bushings for Template Work

$31.99

Expand the capabilities and precision of your router work with this 10-piece brass bushing set.

Bushings turn your router into a precision-cutting machine, whether it’s for duplicating patterns, sign-making, mortises, bowtie keys, inlays, or any project involving template work.

All guides protrude 0.24” and can be used with any template ¼” thick or more.

Includes:

Lock nuts (2x)
8 different outside diameter guide bushings including: 5/16”, ⅜”, 7/16”, ½”, ⅝”, ¾”, 51/64”, 1”
Hard protective case

$6.00

An MFT Workbench can do it all, but the best part is being able to make square cross cuts on large panels with a tracksaw!

This MFT is small yet robust, and has an extension wing so you can safely make cuts on super long boards!

These plans include measurements in both Metric and Imperial.

1) 20mm Dog Holes spaced 96mm apart with all other dimensions in Metric

2) 20mm Dog Holes spaced 96mm apart with all other dimensions in Imperial

3) 3/4" Dog Holes spaced 3" apart with all other dimensions in Imperial.

So you have lots of options!

Using a Dog Hole Template will help you along the way:

20mm Dog Hole Template

3/4" Dog Hole Template

A Rail Hinge will make this MFT even better:

Tracksaw Rail Hinge

A Stop block for 2040 extrusion is really handy too:

Flip Stop for 2040 Extrusion

NOTE: After purchasing, a link to download the plans will appear on the CONFIRMATION PAGE and you will receive a SEPARATE e-mail.

Have a small shop? This Miter Saw Station is the perfect solution! It’s only 45” wide, but it can expand up to 168” wide when you need it to!

It features wings that fold up when you need to cut longer pieces, and it also has extra extension arms when you’re cutting even longer parts!

This a a quick build that will immediately change the way you work in your shop. This version has a cabinet in the base, but it would be really useful to put a bank of drawers in there instead, I can’t wait to see how you get creative with this!

There is no fence on this miter saw station, so it is best paired with a Slide Stop for accurate, repeatable cuts.

This download includes a Fusion file for the storage baskets so you can customize them to fit your finished specs based on your saw.

Enjoy the build!

Flip Stop 3D Print File

$5.00

Have access to a 3D printer? Here is the file for the Flip Stop!

This stop was specifically designed to fit on 2040 extrusion, so it's a low-profile stop coming in at 33mm or 1-1/2" tall.

The slot on top will fit a 10-32 or M5 thread.

Nut that will fit 2040 extrusion: https://amzn.to/4dlJHGj

Knob that will fit that nut: https://amzn.to/4eBJOPe

There are 2 files in this download:

The .stl file will print 1 color with embossed lettering.

The .3mf file is for multi-color printing.

After Printing, you will need to "break" the hinge apart in order for it to function.

Happy printing!

Drawer Pull Jig

$8.00

Create perfect integrated drawer pulls with this swappable Drawer Pull Jig!

There are 4 different shapes you can choose from to match any project you’re working on.

Simply click the insert into the main base, use the center finding indent to line it up with your workpiece, and clamp it to your bench using the built-in clamping slots.

Feel free to create more custom shapes and have fun!

The .stl file for the main base has the letters and logo embossed. If you want to do a multi-color print, use the included .3mf file which contains all the parts.

Folding Outfeed Table with Extension Rollers

$9.00

Have a small shop? This folding outfeed table is the perfect solution with the ability to fold away and extend to about 49” from the saw if you need it!

I drew up these plans based off my saw, but they are easy to customize based on your saw’s dimensions.

If you have a jobsite saw, just build a stand with a back panel to attach the table!

Combination Workbench

$28.00

Can’t decide if you want a traditional workbench or a modern assembly table? Well, why not build both!

This bench is the perfect combination of old school and new school with two super functional worktops, and it has a ton of storage too!

I built this bench from rough lumber, but the plans are drawn up so you can build it from dimensional lumber you can pick up at your local big box store.

Lots of fun techniques and opportunities for customization… I can’t wait to see what you come up with!

Final Workbench Dimensions:

Base - 60x36

Top - 75x36

The bench is 34” high, which is the perfect height for an outfeed table, but the height is customizable for your needs!